As you get ready to pass the CCNA or CCNP exams, you can feel quite a bit of stress as you enter your last week of study. Let's take a look at a few ways to reduce that stress.
1. Do not stay up late cramming. The CCNA and CCNP are not exams you're going to pass by cramming. "Cramming" is a study technique best left behind in junior high school. The CCNA can't be passed by memorization - you've got to know how Cisco technologies work. That leads us to the second point...
2. Get lots of rest. By far, this is the most overlooked factor on exam day. The CCNA and CCNP exams are going to demand your best. You're going to be performing subnetting, binary and hex conversions, analyzing network diagrams for troubleshooting, and much more. You've got to be mentally sharp. You can add 100 points to your exam score just by showing up well-rested. And let's be realistic - if you don't know something at 11 PM the night before your exam, you're not going to learn it overnight. Get some sleep!
3. Get everything together the night before the exam. You don't want to be running around the house the morning of the exam looking for your keys. Make sure you have your keys and your ID the night before the exam.
4. Know where the testing center is. If you've never been to the center you'll be passing the CCNA in before, go there before the morning of the exam. Do not rely on Mapquest or a friend's directions. You don't want to be late for your exam.
5. Allow for traffic. Many CCNA and CCNP candidates prefer to take their exams in the morning. Again, if you haven't been to the exam center before, you should drive there during morning rush hour traffic before your exam date to make sure you have enough time to get there. You don't want to be sitting in traffic when you should be sitting in the exam room!
Showing posts with label study. Show all posts
Showing posts with label study. Show all posts
Friday, December 26, 2008
Thursday, December 25, 2008
Cisco CCNA Exam Tutorial: The Best Time To Schedule Your Exam
In preparing for CCNA exam success, one of the basic steps is to schedule your exam! And when should you do that?
Schedule your exam NOW.
I can hear you now -- " Why should I schedule my exam now? I haven’t started studying yet!"
From experience, I can tell you that this technique works. People complain about timetables and deadlines, but the truth is that people do their best work with a deadline. “Stress” is not the dirty word that we’ve made it out to be. A diamond is only a lump of coal that was put under pressure.
I wish I had a nickel for every time I’ve heard this:
"I’ll schedule my exam when I’m ready."
You know when "ready" is? For many people, NEVER. I know someone who’s been preparing for his CCNA for years – literally! He’s going to schedule that exam when he’s ready. He’s been getting ready for years!
By scheduling your exam now, you give yourself a mental deadline. You’ll be surprised at how focused your mind becomes when you know the date of your exam before you start. I have used this technique for my CCNA, CCNP, and CCIE exams. It will work for you!
You can schedule your exam with Prometric or VUE right now! Just search for either of those companies in your favorite search engine, and register online today.
Both sites have test center locators, so no matter where you are in the world, you can find the testing center nearest you.
We all have times of the day that we’re mentally sharper than others. I personally am a "morning person", so I always schedule my exams for first thing in the morning. If you’re stronger in the afternoon, schedule an afternoon exam. Regardless of the time of day you’re going to take the exam – schedule it now, right now!
Schedule your exam NOW.
I can hear you now -- " Why should I schedule my exam now? I haven’t started studying yet!"
From experience, I can tell you that this technique works. People complain about timetables and deadlines, but the truth is that people do their best work with a deadline. “Stress” is not the dirty word that we’ve made it out to be. A diamond is only a lump of coal that was put under pressure.
I wish I had a nickel for every time I’ve heard this:
"I’ll schedule my exam when I’m ready."
You know when "ready" is? For many people, NEVER. I know someone who’s been preparing for his CCNA for years – literally! He’s going to schedule that exam when he’s ready. He’s been getting ready for years!
By scheduling your exam now, you give yourself a mental deadline. You’ll be surprised at how focused your mind becomes when you know the date of your exam before you start. I have used this technique for my CCNA, CCNP, and CCIE exams. It will work for you!
You can schedule your exam with Prometric or VUE right now! Just search for either of those companies in your favorite search engine, and register online today.
Both sites have test center locators, so no matter where you are in the world, you can find the testing center nearest you.
We all have times of the day that we’re mentally sharper than others. I personally am a "morning person", so I always schedule my exams for first thing in the morning. If you’re stronger in the afternoon, schedule an afternoon exam. Regardless of the time of day you’re going to take the exam – schedule it now, right now!
Cisco CCNA Exam Tutorial: How To Spend Your Study Time
To pass the CCNA exam, you've got to create a study plan. Part of that plan is scheduling your study time, and making that study time count.
You’ve scheduled your exam you’ve created a document to track your study time you’ve planned exactly when you’re going to study. Now the plan must be carried out, without exception.
What exceptions do I mean? Cell phones. Televisions. IPods. Significant others. The list can go on and on.
It’s one thing to have a plan, and an important thing now you’ve got to make sure you carry it out to its fullest potential. That’s easy to say until you’re studying and a friend calls, or you remember that TV show you wanted to watch is on tonight, or you start surfing the Web for Cisco information and end up playing a game.
You MUST make these small sacrifices in order to achieve your main goal, the CCNA. Any worthwhile accomplishment requires some small sacrifice.
TV will be there when you’re done studying. Your significant other will be there when you’re done studying. And believe it or not, people once existed without cell phones! Turn the phone off. Turn your instant messenger service off. Turn your text pager off. Despite what we think, the world can do without communicating with us for 90 minutes. Remember, it’s better to have 90 minutes of great study than 180 minutes of constantly interrupted study. Studies show that while a single phone call causes an 11-minute interruption on average, it takes well over 20 minutes to get back to what you were doing with the proper mental focus. This is true at the office and at your home!
How To Spend Your Study Time CCNA candidates generally spend their time split between book study, practice exams, and lab time on real Cisco equipment. The best study is done by a combination of these, not by overly relying on one. Let’s take a look at each method.
Book study – I’ve never understood why some people (usually the trolls we were talking about earlier) talk about book study like it’s a bad thing. "You can’t learn about technology from books." What a load of manure. You have to learn the theory before you can understand how a router or switch operates. The best way to learn the theory is to read a good book.
At the CCNA level, you doubtless know that you have dozens of choices when it comes to books. Some of the better-known books really do gloss over some important topics, such as binary math and subnetting. Make sure to pick a book or books that go beyond just explaining the theory and that give you a lot of explanation of router configs and real-world examples as well.
Practice Exams: Practice exams are good in moderation, but don’t use them as your main focus of study. Occasionally, I’m asked for study tips by candidates who have taken the exam a few times and not passed yet. I ask them what they’re doing to prepare, and they give a list of companies they bought practice exams from. (You see a lot of this on Internet forums as well.)
Don’t fall into this trap. Practice exams are fine if used as a readiness check, but some candidates just take them over and over again, which renders them basically useless.
On top of that, some of them cost hundreds of dollars. That’s money you’d be much better off spending on Cisco equipment to practice on.
Again, I’m not against practice exams as a supplement to your studies. Just don’t make them the main focus of your study. Taking practice exams over and over and hoping the exam will be just like the practice exam is a recipe for disaster. As I tell my students, when you’re in front of a rack of routers and switches during a job interview (or at 2AM when you’ve been called in to fix a problem), the correct answer is not "D". You’ve got to know what to do.
And how do you learn these skills? Funny you should ask.... Lab Time On Real Cisco Equipment. Again, speaking from experience: This is the most important part of getting your CCNA, succeeding on the job, and going on to get your CCNP.
Getting hands-on experience is critical to developing your networking skills, especially your troubleshooting skills. Although simulators are better than they used to be, they’re still not Cisco routers, and they never will be.
You do your best learning not only when you’re configuring your routers, but when you screw something up.
That’s so important, I want to repeat it – loudly: You do your best learning when you screw something up. Why? Because then you have to fix it that’s how you develop your troubleshooting skills. You can read about all the debug and show commands in the world, but you don’t really understand how they work until you’re figuring out why your Frame Relay connection isn’t working, or your RIP configuration isn’t working.
This is true at every level of the Cisco Learning Pyramid. I can show you the show ip protocols output or what you get when you run debug ip rip, and you might remember it for a little while. But when you use it to troubleshoot a lab configuration, you WILL remember it.
Putting your own practice lab together will also help get you over what I call "simulator question anxiety". If you spend any time on CCNA Internet forums, you’ll see discussion after discussion about these exam questions. To a certain point, this discussion is justified. The simulator questions carry more weight on your exam than any other question while you can earn partial credit on them, you’ve got to get them right or you will most likely fail the exam.
There’s no reason to be anxious about them if you’re prepared. You don’t want to be the person who walks into the testing room that’s scared to have to create a VLAN or an access list you want to be the person who walks into the testing room confident of their ability to perform any CCNA task. The best way to be that confident is to know you’ve done it – on real Cisco equipment.
There are several vendors that sell routers and switches on ebay most of them sell CCNA and CCNP kits that include all the cables and transceivers that you’ll need as well. (And how is a simulator going to help you learn about cables and transceivers?) Keep in mind that you can always sell the equipment after you’re done with the CCNA, or you can add a little equipment to it to go after your CCNP.
Whichever of these methods you use (and I hope you’ll use all of them), make sure to keep them in balance with each other. Don’t depend too much on just one.
On the topic of learning how to troubleshoot… as you run labs on your Cisco equipment, you’ll run into questions or problems that you don’t know the answer to yet. Get used to using Google (or your favorite search engine) to find the answer to these problems - but try to figure it our yourself first!
There’s nothing wrong with asking questions of someone else if you’re not able to find the answer yourself. Trying to find the answer yourself is another important troubleshooting skill you need to start developing today. Don’t be one of these people who posts a simple question on a forum without trying to find the answer on your own. Besides, you get more satisfaction and build more confidence when you determine the answer yourself.
You’ve scheduled your exam you’ve created a document to track your study time you’ve planned exactly when you’re going to study. Now the plan must be carried out, without exception.
What exceptions do I mean? Cell phones. Televisions. IPods. Significant others. The list can go on and on.
It’s one thing to have a plan, and an important thing now you’ve got to make sure you carry it out to its fullest potential. That’s easy to say until you’re studying and a friend calls, or you remember that TV show you wanted to watch is on tonight, or you start surfing the Web for Cisco information and end up playing a game.
You MUST make these small sacrifices in order to achieve your main goal, the CCNA. Any worthwhile accomplishment requires some small sacrifice.
TV will be there when you’re done studying. Your significant other will be there when you’re done studying. And believe it or not, people once existed without cell phones! Turn the phone off. Turn your instant messenger service off. Turn your text pager off. Despite what we think, the world can do without communicating with us for 90 minutes. Remember, it’s better to have 90 minutes of great study than 180 minutes of constantly interrupted study. Studies show that while a single phone call causes an 11-minute interruption on average, it takes well over 20 minutes to get back to what you were doing with the proper mental focus. This is true at the office and at your home!
How To Spend Your Study Time CCNA candidates generally spend their time split between book study, practice exams, and lab time on real Cisco equipment. The best study is done by a combination of these, not by overly relying on one. Let’s take a look at each method.
Book study – I’ve never understood why some people (usually the trolls we were talking about earlier) talk about book study like it’s a bad thing. "You can’t learn about technology from books." What a load of manure. You have to learn the theory before you can understand how a router or switch operates. The best way to learn the theory is to read a good book.
At the CCNA level, you doubtless know that you have dozens of choices when it comes to books. Some of the better-known books really do gloss over some important topics, such as binary math and subnetting. Make sure to pick a book or books that go beyond just explaining the theory and that give you a lot of explanation of router configs and real-world examples as well.
Practice Exams: Practice exams are good in moderation, but don’t use them as your main focus of study. Occasionally, I’m asked for study tips by candidates who have taken the exam a few times and not passed yet. I ask them what they’re doing to prepare, and they give a list of companies they bought practice exams from. (You see a lot of this on Internet forums as well.)
Don’t fall into this trap. Practice exams are fine if used as a readiness check, but some candidates just take them over and over again, which renders them basically useless.
On top of that, some of them cost hundreds of dollars. That’s money you’d be much better off spending on Cisco equipment to practice on.
Again, I’m not against practice exams as a supplement to your studies. Just don’t make them the main focus of your study. Taking practice exams over and over and hoping the exam will be just like the practice exam is a recipe for disaster. As I tell my students, when you’re in front of a rack of routers and switches during a job interview (or at 2AM when you’ve been called in to fix a problem), the correct answer is not "D". You’ve got to know what to do.
And how do you learn these skills? Funny you should ask.... Lab Time On Real Cisco Equipment. Again, speaking from experience: This is the most important part of getting your CCNA, succeeding on the job, and going on to get your CCNP.
Getting hands-on experience is critical to developing your networking skills, especially your troubleshooting skills. Although simulators are better than they used to be, they’re still not Cisco routers, and they never will be.
You do your best learning not only when you’re configuring your routers, but when you screw something up.
That’s so important, I want to repeat it – loudly: You do your best learning when you screw something up. Why? Because then you have to fix it that’s how you develop your troubleshooting skills. You can read about all the debug and show commands in the world, but you don’t really understand how they work until you’re figuring out why your Frame Relay connection isn’t working, or your RIP configuration isn’t working.
This is true at every level of the Cisco Learning Pyramid. I can show you the show ip protocols output or what you get when you run debug ip rip, and you might remember it for a little while. But when you use it to troubleshoot a lab configuration, you WILL remember it.
Putting your own practice lab together will also help get you over what I call "simulator question anxiety". If you spend any time on CCNA Internet forums, you’ll see discussion after discussion about these exam questions. To a certain point, this discussion is justified. The simulator questions carry more weight on your exam than any other question while you can earn partial credit on them, you’ve got to get them right or you will most likely fail the exam.
There’s no reason to be anxious about them if you’re prepared. You don’t want to be the person who walks into the testing room that’s scared to have to create a VLAN or an access list you want to be the person who walks into the testing room confident of their ability to perform any CCNA task. The best way to be that confident is to know you’ve done it – on real Cisco equipment.
There are several vendors that sell routers and switches on ebay most of them sell CCNA and CCNP kits that include all the cables and transceivers that you’ll need as well. (And how is a simulator going to help you learn about cables and transceivers?) Keep in mind that you can always sell the equipment after you’re done with the CCNA, or you can add a little equipment to it to go after your CCNP.
Whichever of these methods you use (and I hope you’ll use all of them), make sure to keep them in balance with each other. Don’t depend too much on just one.
On the topic of learning how to troubleshoot… as you run labs on your Cisco equipment, you’ll run into questions or problems that you don’t know the answer to yet. Get used to using Google (or your favorite search engine) to find the answer to these problems - but try to figure it our yourself first!
There’s nothing wrong with asking questions of someone else if you’re not able to find the answer yourself. Trying to find the answer yourself is another important troubleshooting skill you need to start developing today. Don’t be one of these people who posts a simple question on a forum without trying to find the answer on your own. Besides, you get more satisfaction and build more confidence when you determine the answer yourself.
Wednesday, December 24, 2008
Cisco CCNA Certification Exam Tutorial: Keep Your Most Important Appointment
Imagine this. You have an appointment with a client to work on a server or router install. A few minutes before you're scheduled to be there, you decide there's something really good on TV you'd like to watch. Or you decide to go to the gym, or play a game, or do anything else except go see the client.
Even if you weren't going to get fired for not showing up, it's certainly unfair to the client. You've got a professional obligation, and you should be there on time.
Now, what's this got to do with you becoming a CCNA or CCNP? Plenty. Because when it comes to your study time, you're the client. You owe it to yourself to show up. You would never blow off an appointment to meet a client to get some important work done.
First, though, you have to make that appointment with yourself! Schedule your CCNA / CCNP study time, and keep that appointment as you would with a client. Turn off the TV, your cell, your iPod, and everything else electronic that you carry around. Believe it or not, the world can survive with being in contact with you for an hour or so! You might even like it!
Getting certified isn't about how many hours, days, or weeks you spend studying. It's about how much quality time you put in. Be honest with yourself and realize that you're better off with 45 minutes of uninterrupted study as you would be with three hours of constantly interrupted study.
Don't blow off an appointment to yourself, either. Schedule the time, be there on time, get your study done, and you're one step closer to your CCNA and CCNP!
Even if you weren't going to get fired for not showing up, it's certainly unfair to the client. You've got a professional obligation, and you should be there on time.
Now, what's this got to do with you becoming a CCNA or CCNP? Plenty. Because when it comes to your study time, you're the client. You owe it to yourself to show up. You would never blow off an appointment to meet a client to get some important work done.
First, though, you have to make that appointment with yourself! Schedule your CCNA / CCNP study time, and keep that appointment as you would with a client. Turn off the TV, your cell, your iPod, and everything else electronic that you carry around. Believe it or not, the world can survive with being in contact with you for an hour or so! You might even like it!
Getting certified isn't about how many hours, days, or weeks you spend studying. It's about how much quality time you put in. Be honest with yourself and realize that you're better off with 45 minutes of uninterrupted study as you would be with three hours of constantly interrupted study.
Don't blow off an appointment to yourself, either. Schedule the time, be there on time, get your study done, and you're one step closer to your CCNA and CCNP!
Cisco CCNA / CCNP Home Lab Tutorial: Planning Ahead For IE Study
Candidates preparing to pass the CCNP exams are putting together Cisco home labs like never before. With CCNA and CCNP home lab equipment more affordable than ever, candidates have realized the importance of working on real Cisco routers and switches on the way to earning their certifications.
One question I get often from CCNP candidates is goes something like this: "I'm planning on pursuing the CCIE after I get my CCNP. What kind of routers and switches should I buy now in order to use the same equipment in my CCIE home lab?"
This is going to sound strange coming from me, because I'm the #1 proponent of CCNA and CCNP candidates buying their own home labs. When it comes to the CCIE, though, I have to say that you're probably better off using rack rentals instead of investing big money now to buy more expensive equipment with which to earn your CCNP.
There are plenty of 2500 and 2600 routers out there that you can buy to prepare fully for your CCNA and CCNP exams that may not have the capability needed for IE preparation. (For instance, while 2500 routers are fantastic for CCNA and NP study, they shouldn't be used for IE study.) The issue with buying more expensive equipment is that Cisco rightfully updates the CCIE lab equipment list twice a year, and these moves can prove very costly for those who get caught in the middle of these changes.
Let me give you an example that I lived through myself. When I began pursuing the CCIE, Catalyst switches were in use in the lab. I had a Cat 5000 that I used for practice. When I was in the middle of my preparation, Cisco introduced L3 switched to the lab in the form of TWO 3550 switches. Not only was the Cat now almost useless for IE study, the new switches went for about $5500 apiece, so if I wanted to keep up with the new lab changes, it was going to cost me $11,000.
Again, I know that it's vitally important for today's CCNA and CCNP candidates to get hands-on experience with home labs. It's also great to think ahead when you're earning your CCNP, and pursuing the CCIE is one of the best decisions you'll ever make. Just keep this regular CCIE lab update in mind. I recommend that you keep your CCNP budget down while not investing in more expensive routers with the IE in mind, and wait until you have passed the CCNP and are actively engaged in CCIE study before making the decision between rack rentals and putting together your own IE lab.
One question I get often from CCNP candidates is goes something like this: "I'm planning on pursuing the CCIE after I get my CCNP. What kind of routers and switches should I buy now in order to use the same equipment in my CCIE home lab?"
This is going to sound strange coming from me, because I'm the #1 proponent of CCNA and CCNP candidates buying their own home labs. When it comes to the CCIE, though, I have to say that you're probably better off using rack rentals instead of investing big money now to buy more expensive equipment with which to earn your CCNP.
There are plenty of 2500 and 2600 routers out there that you can buy to prepare fully for your CCNA and CCNP exams that may not have the capability needed for IE preparation. (For instance, while 2500 routers are fantastic for CCNA and NP study, they shouldn't be used for IE study.) The issue with buying more expensive equipment is that Cisco rightfully updates the CCIE lab equipment list twice a year, and these moves can prove very costly for those who get caught in the middle of these changes.
Let me give you an example that I lived through myself. When I began pursuing the CCIE, Catalyst switches were in use in the lab. I had a Cat 5000 that I used for practice. When I was in the middle of my preparation, Cisco introduced L3 switched to the lab in the form of TWO 3550 switches. Not only was the Cat now almost useless for IE study, the new switches went for about $5500 apiece, so if I wanted to keep up with the new lab changes, it was going to cost me $11,000.
Again, I know that it's vitally important for today's CCNA and CCNP candidates to get hands-on experience with home labs. It's also great to think ahead when you're earning your CCNP, and pursuing the CCIE is one of the best decisions you'll ever make. Just keep this regular CCIE lab update in mind. I recommend that you keep your CCNP budget down while not investing in more expensive routers with the IE in mind, and wait until you have passed the CCNP and are actively engaged in CCIE study before making the decision between rack rentals and putting together your own IE lab.
Tuesday, December 23, 2008
Cisco CCNA / CCNP Certification Exam: Creating A Study Plan
Whether you're just starting to think about passing the CCNA or CCNP exams, or you've been on the certification track for a while, you've got to have a plan for success. If you wanted to drive your car from Florida to California, you'd create a plan to get there. You'd get a map and decide how far you wanted to drive per day, and maybe even make some hotel reservations in advance. You certainly wouldn't get in your car, just drive it randomly down the nearest highway, and hope you ended up in California, would you?
Certainly not. Earning your CCNA certification is the same way. It's not enough to just study a few minutes "when you feel like it", or tell yourself that you'll start studying for the exams "when I get such-and-such done". The perfect time to start on the road to Cisco certification is not tomorrow, and it's not next week. It's today.
You're much better off with one hour of solid study than three hours of interrupted, unfocused study. Here are a few ways to go about getting the kind of quality study time that will get you to the CCNA or CCNP (or any Cisco certification, for that matter!).
Schedule your study time, and regard this study time as you would an appointment with a client. If you were to meet a customer at 10:00 to discuss a network install, would you just decide not to show up and watch television instead? Not if you wanted the job. The same goes for your study time. That's an appointment with the most important customer of all - YOU.
Turn your cell, iPod, TV, instant messenger, and all other electronic collars off for the duration of your study time. I know those of us in information technology don't like to say this, but we can actually exist without being in touch with the world for a little while. You may even get to like it! Having uninterrupted study time is key to CCNA and CCNP exam success.
Finally, schedule your exam before you start studying. Contrary to what many people think, "deadline" is not a dirty word. We do our best work when we have a deadline and a schedule to keep. Make out your study schedule, schedule your exam, and get to work just as you would a network project for a customer. The project you're working on is your career and your life, and by following these simple steps you can make it a highly successful project - by passing your CCNA and CCNP exam!
Certainly not. Earning your CCNA certification is the same way. It's not enough to just study a few minutes "when you feel like it", or tell yourself that you'll start studying for the exams "when I get such-and-such done". The perfect time to start on the road to Cisco certification is not tomorrow, and it's not next week. It's today.
You're much better off with one hour of solid study than three hours of interrupted, unfocused study. Here are a few ways to go about getting the kind of quality study time that will get you to the CCNA or CCNP (or any Cisco certification, for that matter!).
Schedule your study time, and regard this study time as you would an appointment with a client. If you were to meet a customer at 10:00 to discuss a network install, would you just decide not to show up and watch television instead? Not if you wanted the job. The same goes for your study time. That's an appointment with the most important customer of all - YOU.
Turn your cell, iPod, TV, instant messenger, and all other electronic collars off for the duration of your study time. I know those of us in information technology don't like to say this, but we can actually exist without being in touch with the world for a little while. You may even get to like it! Having uninterrupted study time is key to CCNA and CCNP exam success.
Finally, schedule your exam before you start studying. Contrary to what many people think, "deadline" is not a dirty word. We do our best work when we have a deadline and a schedule to keep. Make out your study schedule, schedule your exam, and get to work just as you would a network project for a customer. The project you're working on is your career and your life, and by following these simple steps you can make it a highly successful project - by passing your CCNA and CCNP exam!
Monday, December 22, 2008
CCNP Certification / BCMSN Exam Tutorial: Server Load Balancing (SLB)
When you're working on your BCMSN exam on your way to CCNP certification, you'll read at length about how Cisco routers and multilayer switches can work to provide router redundancy - but there's another helpful service, Server Load Balancing, that does the same for servers. While HSRP, VRRP, and CLBP all represent multiple physical routers to hosts as a single virtual router, SLB represents multiple physical servers to hosts as a single virtual server.
In the following example, three physical servers have been placed into the SRB group ServFarm. They're represented to the hosts as the virtual server 210.1.1.14.
The hosts will seek to communicate with the server at 210.1.1.14, not knowing that they're actually communicating with the routers in ServFarm. This allows quick cutover if one of the physical servers goes down, and also serves to hide the actual IP addresses of the servers in ServFarm.
The basic operations of SLB involves creating the server farm, followed by creating the virtual server. We'll first add 210.1.1.11 to the server farm:
MLS(config)# ip slb serverfarm ServFarm
MLS(config-slb-sfarm)# real 210.1.1.11
MLS(config-slb-real)# inservice
The first command creates the server farm, with the real command specifying the IP address of the real server. The inservice command is required by SLB to consider the server as ready to handle the server farm's workload. The real and inservice commands should be repeated for each server in the server farm.
To create the virtual server:
MLS(config)# ip slb vserver VIRTUAL_SERVER
MLS(config-slb-vserver)# serverfarm ServFarm
MLS(config-slb-vserver)# virtual 210.1.1.14
MLS(config-slb-vserver)# inservice
From the top down, the vserver was named VIRTUAL_SERVER, which represents the server farm ServFarm. The virtual server is assigned the IP address 210.1.1.14, and connections are allowed once the inservice command is applied.
You may also want to control which of your network hosts can connect to the virtual server. If hosts or subnets are named with the client command, those will be the only clients that can connect to the virtual server. Note that this command uses wildcard masks. The following configuration would allow only the hosts on the subnet 210.1.1.0 /24 to connect to the virtual server.
MLS(config-slb-vserver)# client 210.1.1.0 0.0.0.255
SLB is the server end's answer to HSRP, VRRP, and GLBP - but you still need to know it to become a CCNP! Knowing redundancy strategies and protocols is vital in today's networks, so make sure you're comfortable with SLB before taking on the exam.
In the following example, three physical servers have been placed into the SRB group ServFarm. They're represented to the hosts as the virtual server 210.1.1.14.
The hosts will seek to communicate with the server at 210.1.1.14, not knowing that they're actually communicating with the routers in ServFarm. This allows quick cutover if one of the physical servers goes down, and also serves to hide the actual IP addresses of the servers in ServFarm.
The basic operations of SLB involves creating the server farm, followed by creating the virtual server. We'll first add 210.1.1.11 to the server farm:
MLS(config)# ip slb serverfarm ServFarm
MLS(config-slb-sfarm)# real 210.1.1.11
MLS(config-slb-real)# inservice
The first command creates the server farm, with the real command specifying the IP address of the real server. The inservice command is required by SLB to consider the server as ready to handle the server farm's workload. The real and inservice commands should be repeated for each server in the server farm.
To create the virtual server:
MLS(config)# ip slb vserver VIRTUAL_SERVER
MLS(config-slb-vserver)# serverfarm ServFarm
MLS(config-slb-vserver)# virtual 210.1.1.14
MLS(config-slb-vserver)# inservice
From the top down, the vserver was named VIRTUAL_SERVER, which represents the server farm ServFarm. The virtual server is assigned the IP address 210.1.1.14, and connections are allowed once the inservice command is applied.
You may also want to control which of your network hosts can connect to the virtual server. If hosts or subnets are named with the client command, those will be the only clients that can connect to the virtual server. Note that this command uses wildcard masks. The following configuration would allow only the hosts on the subnet 210.1.1.0 /24 to connect to the virtual server.
MLS(config-slb-vserver)# client 210.1.1.0 0.0.0.255
SLB is the server end's answer to HSRP, VRRP, and GLBP - but you still need to know it to become a CCNP! Knowing redundancy strategies and protocols is vital in today's networks, so make sure you're comfortable with SLB before taking on the exam.
Subscribe to:
Posts (Atom)
