One of the drawbacks to the Internet is that it allows myths and "friend of a friend" stories to spread quickly, and usually the story becomes more exaggerated as it's passed along. Cisco exams are no exception. Here are three often-repeated myths and exaggerations regarding the CCNA and CCNP exams.
1. The survey you fill out before the exam determines the questions you'll get. Before you actually start your exam, Cisco presents you with a survey asking how you prepared and how comfortable you feel with certain technologies. It's a little awkward to rate yourself on Frame Relay, ISDN, etc., especially since the exam you're about to take covers those subjects. It's human nature to think that these questions impact your exam, but they do not.
I've seen posts on the Net saying that if you rank yourself as "great" in a subject, your exam will have harder questions on that topic, and if you rank yourself lower in that same subject, your exam will be filled with questions on this topic. Cisco has debunked this myth, so get it out of your mind. Don't think too much when you're filling out the survey.
2. If you miss a question, the exam keeps asking you about that topic until you get one right. This is known as "adaptive testing", and Cisco does not use this kind of testing in its exams. Your questions are drawn from a large question pool before you start the test. Those of us who remember adaptive testing from Novell exams years ago don't particularly miss this kind of testing! (For those who haven't taken an adaptive exam, you never knew how many questions you were going to get, only that there was a minimum around 15 questions. Your exam could end at any time after that. Nerve-wracking!)
3. If you use an extra command in the simulator questions, it'll be marked wrong. The Cisco simulator engine in the CCNA and CCNP exams acts just as a router or switch would. You are not going to be penalized for using an extra command. If the engine doesn't accept a command, you'll be told that when you use it. Just configure it as you would a router or switch.
When you walk into the exam room totally prepared with a combination of theoretical knowledge, hands-on experience, and configuration troubleshooting skills, you are ready to pass. Don't let Internet gossip distract you from the task at hand -- passing!
Showing posts with label simulator. Show all posts
Showing posts with label simulator. Show all posts
Saturday, December 27, 2008
Wednesday, December 24, 2008
Cisco CCNA / CCNP Home Lab Tutorial: Using 2520 Routers
I know from experience that part of the excitement and anxiety of putting together your own CCNA / CCNP home lab is deciding what to buy! While you can make a workable home lab out of almost any combination of Cisco routers and switches, some routers are better suited for home lab work than others because they can fill multiple roles.
My personal favorite is the Cisco 2520. This router has four serial interfaces, making it an ideal frame relay switch. Don't forget that just because you're using a router as a frame switch, you can still use its routing capabilities. One setup I use is to use three of the four serial interfaces for frame switching and the fourth interface as a point-to-point network with another router. All you need is some DTE/DCE cables and you're all set.
The 2520 also comes with one ethernet interface and an ISDN interface, so that gives you even more options. Even if you're not planning to run ISDN in your home lab right now, you may choose to do so in the future - and with a 2520, you've already got the right router to do so. Keep in mind that if you are going to run ISDN in your home lab, you’ll need an ISDN device such as an ISDN simulator in your lab. (ISDN simulators are physical devices and are plentiful on ebay – they’re no relation to “router simulators”.)
Again, I want to reiterate that you can work any Cisco router into a CCNA / CCNP home lab - there's no "right" or "wrong" combination of equipment. But as with anything else, some combinations are better than others, so consider adding some 2520s to your home lab! This router gives you a great combination of interfaces and capabilities, plus the most important factor of all - real hands-on experience during your CCNA and CCNP exam preparation!
My personal favorite is the Cisco 2520. This router has four serial interfaces, making it an ideal frame relay switch. Don't forget that just because you're using a router as a frame switch, you can still use its routing capabilities. One setup I use is to use three of the four serial interfaces for frame switching and the fourth interface as a point-to-point network with another router. All you need is some DTE/DCE cables and you're all set.
The 2520 also comes with one ethernet interface and an ISDN interface, so that gives you even more options. Even if you're not planning to run ISDN in your home lab right now, you may choose to do so in the future - and with a 2520, you've already got the right router to do so. Keep in mind that if you are going to run ISDN in your home lab, you’ll need an ISDN device such as an ISDN simulator in your lab. (ISDN simulators are physical devices and are plentiful on ebay – they’re no relation to “router simulators”.)
Again, I want to reiterate that you can work any Cisco router into a CCNA / CCNP home lab - there's no "right" or "wrong" combination of equipment. But as with anything else, some combinations are better than others, so consider adding some 2520s to your home lab! This router gives you a great combination of interfaces and capabilities, plus the most important factor of all - real hands-on experience during your CCNA and CCNP exam preparation!
Cisco CCNA / CCNP Home Lab: Why You Need An ISDN Simulator
ISDN is a vital topic for today's CCNA and CCNP candidates, especially for the ICND and Intro exams - you've got to know ISDN inside and out to pass those exams. Naturally you want to include it in your home lab. What many candidates don't realize is that you can't connect two Cisco routers directly via their Basic Rate Interface (BRI) interfaces you've got to have another device between them called an ISDN simulator.
An ISDN simulator is not one of those software programs pretending to be routers ("router simulators") this is a piece of hardware that acts as the telephone company in your home lab. Older simulators come with preprogrammed phone numbers and SPIDs, where newer ones let you program the phone numbers you want to use. Either way, an ISDN simulator is great for your CCNA/CCNP home lab, because you can practice dial scenarios that actually work. And you get to troubleshoot the ones that don't, which is also important to learn! )
You don't need any special cables or connectors you just connect both of your routers' BRI interfaces to the ISDN simulator with a straight-through cable and you're ready to go.
In years past, this was a major problem for 640-801, 811, and 821 studies, because the simulators used to be so expensive. New ones can still be pricey ($600 and up), but with the sudden influx of used ISDN simulators on ebay and Cisco resellers, you can get a used one that will do the job for you.
Why are there suddenly so many ISDN simulators on the market? Cisco recently removed ISDN from the CCIE R&S exam, so a lot of CCIE rack resellers as well as private individuals are selling their simulators. There's never been a better time to add ISDN to your home lab. If taken care of (kept out of extreme heat), they can last for quite a few years. The one I purchased for my IE home lab is still working well.
If you choose to purchase a new simulator, you can run a Google search to find vendors. I've made two purchases from www.vconsole.com over the last few years and both of those simulators have worked beautifully.
As I said earlier, there's never been a better time to add ISDN to your home lab. Don't just settle for trying to memorize theory - get your hands on the real deal, practice and fix your configurations, and you'll be amazed at what you learn and how well you do on your CCNA and CCNP exams!
An ISDN simulator is not one of those software programs pretending to be routers ("router simulators") this is a piece of hardware that acts as the telephone company in your home lab. Older simulators come with preprogrammed phone numbers and SPIDs, where newer ones let you program the phone numbers you want to use. Either way, an ISDN simulator is great for your CCNA/CCNP home lab, because you can practice dial scenarios that actually work. And you get to troubleshoot the ones that don't, which is also important to learn! )
You don't need any special cables or connectors you just connect both of your routers' BRI interfaces to the ISDN simulator with a straight-through cable and you're ready to go.
In years past, this was a major problem for 640-801, 811, and 821 studies, because the simulators used to be so expensive. New ones can still be pricey ($600 and up), but with the sudden influx of used ISDN simulators on ebay and Cisco resellers, you can get a used one that will do the job for you.
Why are there suddenly so many ISDN simulators on the market? Cisco recently removed ISDN from the CCIE R&S exam, so a lot of CCIE rack resellers as well as private individuals are selling their simulators. There's never been a better time to add ISDN to your home lab. If taken care of (kept out of extreme heat), they can last for quite a few years. The one I purchased for my IE home lab is still working well.
If you choose to purchase a new simulator, you can run a Google search to find vendors. I've made two purchases from www.vconsole.com over the last few years and both of those simulators have worked beautifully.
As I said earlier, there's never been a better time to add ISDN to your home lab. Don't just settle for trying to memorize theory - get your hands on the real deal, practice and fix your configurations, and you'll be amazed at what you learn and how well you do on your CCNA and CCNP exams!
Subscribe to:
Posts (Atom)