Cisco CCNA / CCNP Home Lab Tutorial: The 2501 Router

To be truly prepared for your CCNA and CCNP exams, you need real hands-on experience with real Cisco routers and switches. However, a production network is a really bad place to practice your configurations, but an excellent way to get fired and/or sued. The key to becoming a true CCNA and CCNP is assembling your own Cisco home lab.

You don't have to spend a lot of money to do so; used Cisco equipment is cheaper than ever. It's robust as well - I've bought literally hundreds of used routers and switches over the years and have had very few problems. I owe much of my skill to practicing configurations and troubleshooting in my own home lab.

2501 routers are fantastic for CCNA and CCNP home labs. They come with two serial interfaces, allowing you to connect one interface directly to another router (you'll need a DTE/DCE cable for that, too) while connecting another to a frame relay switch if you like. If you don't have a frame relay switch, you can connect a 2501 directly to two other routers via the serial interfaces.

You also have an AUI port, which requires a transceiver to operate as your Ethernet interface. Transceivers are pretty cheap and readily available from Cisco resellers and ebay vendors, so pick one up for each 2503 you decide to buy.

2501 routers don't come with BRI interfaces, but not every router in your lab has to be ISDN-ready. If you choose not to have ISDN in your lab at all, 2501s are the way to go. If you do want to run ISDN and have an ISDN simulator device, you can get two 2503s and the rest of your routers can be 2501.

All in all, 2501 routers are great for your CCNA / CCNP home lab. They cost less than $100 each on ebay, so they're also very affordable. There's no better training than training on your own CCNA or CCNP home lab, and you can always sell the equipment later if you like. Basically, you're renting the routers and switches, and the experience you get by working with the real deal is invaluable.

Cisco CCNA / CCNP Home Lab Tutorial: Using 2520 Routers

I know from experience that part of the excitement and anxiety of putting together your own CCNA / CCNP home lab is deciding what to buy! While you can make a workable home lab out of almost any combination of Cisco routers and switches, some routers are better suited for home lab work than others because they can fill multiple roles.

My personal favorite is the Cisco 2520. This router has four serial interfaces, making it an ideal frame relay switch. Don't forget that just because you're using a router as a frame switch, you can still use its routing capabilities. One setup I use is to use three of the four serial interfaces for frame switching and the fourth interface as a point-to-point network with another router. All you need is some DTE/DCE cables and you're all set.

The 2520 also comes with one ethernet interface and an ISDN interface, so that gives you even more options. Even if you're not planning to run ISDN in your home lab right now, you may choose to do so in the future - and with a 2520, you've already got the right router to do so. Keep in mind that if you are going to run ISDN in your home lab, you’ll need an ISDN device such as an ISDN simulator in your lab. (ISDN simulators are physical devices and are plentiful on ebay – they’re no relation to “router simulators”.)

Again, I want to reiterate that you can work any Cisco router into a CCNA / CCNP home lab - there's no "right" or "wrong" combination of equipment. But as with anything else, some combinations are better than others, so consider adding some 2520s to your home lab! This router gives you a great combination of interfaces and capabilities, plus the most important factor of all - real hands-on experience during your CCNA and CCNP exam preparation!